As we discussed in part one of our deep dive into railing code, all aspects of a construction project must meet a specific set of code requirements set forth by the International Code Council. In the last blog, we took a dive into the world of building codes and discussed rules related to guardrails and picket spacing. This time, we are going to plunge into rules that deal with handrail. Section 1014 of the International Building Code has a full listing of codes related to handrails within a project. If you aren’t sure what a building code is, or want to learn more about the construction industry as a whole, you can find additional information here.
Disclaimer: All code discussed in this article is national code. Some states/cities/townships have more specific code requirements which supersede the national code. Always check for additional requirements in your project area.
WHERE DO YOU NEED IT?
From a commercial standpoint, handrail is required on both sides of steps or ramps that feature a rise greater than six inches.
Residential applications vary in terms of handrail requirements. In general, the state, county, or municipality will have requirements that must be followed for new construction or renovation.
HOW HIGH SHOULD IT BE?
Just like guard rails, handrail heights have been restricted by the code council. The council determined that handrail heights must be between 34” and 38”, measured from the stair tread (or the surface of the ramp) to the topmost surface of the handrail. So… where does this seemingly random range come from?
Consider the fact that many children begin walking around age one, where the average height is 30” tall. Once an individual reaches a height taller than the 34”-38” range, their arms should be plenty long to reach this handrail height, regardless of how tall they ultimately end up. This range allows accessible usage to people both big and small… after all, everyone has a right to a safe journey up and down the stairs or ramp!
If you read part one of our building code deep-dive, you will recall that a commercial guardrail must be 42” off the ground. This naturally creates an issue, as said guardrails are now too tall for handrail requirements, meaning another piece must be installed. As a remedy to this issue, most handrail systems are built to attach to guardrail in order to create a code-compliant combo.
The nature of handrails makes it such that the manufacturer can only do so much to ensure compliance in terms of height. All a manufacturer can control is the more obvious code restriction that handrail should be uniform throughout a run. Beyond this, it is up to the final installer to properly measure and install a given handrail system.
THERE HAS TO BE MORE, RIGHT?
While yes there are several more code restrictions when it comes to handrail, we find it best not to overwhelm with information all at once. There will be another day soon where we dive deeper into the building code! For now, know that at Superior Aluminum we make it a priority to help you follow the codes…. we may be in the railing business, but safety is ultimately our job. If you have more in-depth questions about handrail codes or would like to learn more about how Superior Aluminum meets code requirements, feel free to contact us. Stay tuned for more building code tips in the future!